Item Type: Wind Pressure Transmitter_x000D_ Material: Aluminum alloy_x000D_ Measuring Medium: Non-corrosive gas_x000D_ Overload Capacity: Single-ended minimum withstand voltage 4Kpa, maximum withstand voltage can not exceed 25 times the range_x000D_ Measurement Accuracy: 0.2%FS_x000D_ Output Signal: 4~20mA_x000D_ Power Supply: DC24V_x000D_ Wire Length: Approx. 50cm / 19.7in_x000D_ Pagoda Mouth Diameter: Approx. 8mm / 0.3in_x000D_ Temperature Drift: 0.1%FS/_x000D_ Ambient Temperature: -30~+80_x000D_ Environmental Humidity: 85%RH_x000D_ Applicable Environment: Widely used in pressure measurement in clean rooms, boilers, dust collectors, vacuum cleaners, power plants, air conditioners, etc._x000D_ Size: Approx. 60mm / 2.4in_x000D_ 51mm / 2in_x000D_ _x000D_ 45mm / 1.8in_x000D_ 20mm / 0.8in_x000D_ 64mm / 2.5in_x000D_ _x000D_ 4mm / 0.2in_x000D_ 40mm / 1.6in_x000D_ 35mm / 1.4in_x000D_ _x000D_ 30mm / 1.2in_x000D_ 10mm / 0.4in_x000D_ _x000D_ 1.5mm / 0.1in 1Wind pressure transmitter has high sensitivity, high accuracy and strong anti-overload capability. 2Transmitter sensor and amplifier circuit are highly integrated with good performance. 3The product has strong anti?interference ability, long?term stability and reliability. 4Using unique stress isolation technology, accuracy temperature compensation and high stability amplification treatment. 5The signal of the measured medium can be converted into a 4-20mA output signal.1 x Wind Pressure Transmitter