Features:Designed for automotive rear view, it is water resistant, dust proof, without worrying about raining and car wash.Using digital fill light and software technology, the image is clear during the day.The viewing angle is 120-150, and the reversing is safer.After high-pressure water immersion test and 12-hour power-on aging test, the multi-layer water resistant design is truly high-pressure rinsing and immersion waterproof.Installed at the high end of the car, the power cord is connected to the taillight power supply. When reversing, the reversing monitoring system automatically starts working, and the situation behind the car can be clearly seen.Suitable for trucks, buses, forklifts, harvesters, cash trucks, fire trucks,etc.Specification:Material: MetalColor: BlackDiagonal viewing angle: 120-150Resolution: 640*480Backlight compensation: power onPhotosensitive area: 4.9*3.7Number of LEDs: 24Night distance: 3-5 metersOutput model range: 75 0hmWater resistant rating: IP66 (rainwater)Rated voltage: DC12V-24VTemperature: -20 C - +70 CApplication: fit for trucks, buses, forklifts, harvesters, cash trucks, fire trucks,etc.Steps for installing the reversing camera:Step 1: First remove the power supply connection at the vehicle battery and place the removed wire away from the electrode to prevent the power supply from being accidentally connected.Step 2: Determine the installation location of the car camera. Generally divided into two types: One is installed in the position of the license plate license plate light, this installation is relatively easy, just use the small screws provided in the camera accessories to fix the camera to the position of the license plate light. Adjust the iron or gasket in the accessories to achieve the best reversing angle of the camera. The camera's line is inserted into the car through the gap of the license plate light, and is connected to the backup lamp power supply and the video extension cable. This type of reversing camera is a popular one, with a more subtle appearance and easier installation. The other is a drilled installation that fits inside the bumper. The advantage of this method is that there is no need to drill holes in the metal parts behind the car. Because the bumper is a plastic piece, the camera is also relatively easy to route.Step 3: Connect the power cable of the camera to the power cable of the rear backup lamp. Then connect the video cable of the camera to the video extension cable, and connect the other end of the video extension cable to the AV input of the car display. Finally, restore the battery power supply, start the car, hang up the reverse gear, you can see the reverse image on the car display.Package List:1 x Camera 1 x 12V power line1 x Instruction manualNote:1. It is not possible to rely solely on reversing the rear view system, but only as an auxiliary tool for reversing.2. The car display must be properly connected. If the display does not provide an AV input, you must find the corresponding video cable or add a video switching device so that the rear view image is displayed normally.3. Do not connect the vehicle electrical power directly to the car battery power supply to avoid unstable power supply..4. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.