Feature: 1. Adopt single chip to control high precision temperature control system and probe, excellent temperature control performance. 2. Humanized design with 3 windows, real-time display of start value and stop value. Equipped with intermittent work, timing switching function, etc. 3. ABS shell, exquisite and beautiful, 1.8mm ultra-thick design, high mechanical strength, good electrical performance and anti-aging. 4. Unique waterproof probe design, stainless steel shell, resin sealing treatment, waterproof and rustproof. 5. -19-99 ultra-wide temperature control range, can be used in various temperature control fields, temperature control accuracy of 0.1, to meet your control needs. Specifications: Item Type: Temperature Controller Module Material: ABS, stainless steel Uses: widely used in the field of incubation, equipment chassis, air conditioning systems, temperature control protection and other areas Humidity measurement Range: -55-120 Temperature measurement accuracy: 0.3 Temperature control range: -19-99 Control accuracy: 1 Humidity measurement probe: NTC10K/B3950 (standard 1 meter waterproof probe) Display color: yellow + red Applicable environment: -25-55 / humidity 20% -85% RH (non-condensing) Output type: 10A relay output Panel size: approx. 90 x 60 mm / 3.5 x 2.4 inch Start Temperature Setting Method: Set the start temperature to 45 and the stop temperature to 60, such as start temperature > stop temperature = mode cooling Setting method: Set the start temperature to 35 and the stop temperature to 32 Machine switching/switching function: 1. When power on, press and hold the SET button for 3 seconds to turn on and turn off the machine. 2. In shutdown state, press the SET button to turn on the phone. If the power is turned off after turning on the power, the power will remain on when turned on again 3. During normal use, press the SET button to perform F-1 (intermittent work), F-2 ( off time), F-3 (on time). 4. Function switching (F1-F3 are additional functions used, and have nothing to do with temperature control setting, and can be used without it) Features: F1: intermittent work, start minute setting at left, right shutdown minutes setting F2: timed shutdown, left hour and right minute, maximum can be set 99 hours and 59 minutes F3: power on timer, left hour and right minute , maximum 99 hours and 59 minutes can be set Temperature correction: Unplug the thermostat, press and hold the SET button to turn on, enter the temperature correction function, the screen displays --000-, you can add or subtract the temperature as a function of the temperature before the correction. Maximum range -9.9C-99, after calibration, real-time temperature = temperature value before calibration + calibration value Self-check function: At the same time, press and hold the button leaving temperature setting on the left, then turn on to enter the self-check function. Reset: At the same time, press and hold the right side to stop the temperature adjustment button, then turn on the screen displays 88-888-88, the buzzer beeps and the factory reset is completed. Package List: 1 x Temperature Controller Module 1 x Panel 1 x Panel Film 1 x Sensor 1 x Screw Pack