Features:*100% brand new and high quality.*Made of high quality material, durable and practical to use.*Strong adhesion to automotive substrates.Weather and car wash resistant.*Can be used on textured surfaces, such as painted cement or brick.*High-strength core maintains a thin, consistent bond line.Easy liner release.*This Tape is used for the attachment of a wide variety of automotive exterior and interior trim including body side moldings, cladding's, rock panel trim, wheel flares, bumper trim and most any automotive trim. Also Great to use on LED strip mountings, Bathrooms, also indoor or outdoor projects.*How to use:1.Clean up, keep dry2. Stick red rubber back side slowly, with tools, leveling and disclose the back glue.3. If the stick tape length is less than 10 cm, can stick red gum all off again.4. After the paste moderate yank, within 24 hours, please don't wash the car.Specifications:ColorAs shown in the figureThickness: 1mmWidth: 20mmLength: 10mPackage Included:1 x Foam Double Sided Tape 10m x20mmPlease Note:*Please keep the contact surface of the double-sided tape clean and dry. After pasting, be sure to press hard for about 10 seconds to make the tape fully contact the contact surface.*The Double-sided adhesive on the glued side viscosity is not very strong at first, Please stick and let sit for 24 hours then effect is very strong, the longer the more viscous.*Manual measurement, please allow 1-5mm error. Thanks for your understanding.