STAIR CONTROLLER LED WITH MOTION DETECTORS PIR 12V or 24V 16 CHANNEL 240W 16 Channel Stair Controller 12-24V 240W 2 PIR Detectors The controller allows smooth cascade lighting of stair lighting placed in the steps of the stairs or next to the steps, most often these are LED tapes - LED strips placed in degrees or LED lamps placed in the wall next to the steps or other type of stair lighting. The controller is equipped with 2 PIR detectors on the wires that we place at the bottom of the stairs and at the top of the stairs. When one of the detectors detects movement (entering or setting), lighting is carried out sequentially from the first light, the last or from the last to the first, depending on which detector detects movement. Inflammation of a single light is carried out gradually with the effect of brightening and dimming. The controller supports voltage from 12V-24V DC (solid voltage) and power up to 240 Watt The controller itself needs very little current for its operation 2W CHARACTERISTICS: Cascading (next) lighting and extinguishing of stair lighting Changing the number of channels, the ability to set the right number of channels from 1 to 16 channels Possibility to set the speed of illumination of subsequent lights Possibility to set the delay of switching off the lighting Possibility to set the brightness of the light (can dim the lighting 25-50-75-100 percent ) SPECIFICATION: Color: White Material: ABS electronic components Number of Channels: 16 Voltage: DC 12V-24V Power: 240W Motion Detection: 2 PIR sensors Size: 148x88mm PACKAGE INCLUDES: 1x stair controller 2x PIR motion sensors (1m) 2x handles 1x Sensor Extension Cable (5m) 1x Set of mounting screws 1x Screwdriver 1x User Manual in English