ArtNet-DMX is an Ethernet to DMX bi-directional converters. It provides bi-directional conversions from ArtNet to DMX512. The equipment with high-speed ARM processors, follow the ArtNet protocol standard provides an RJ45 network interfaces and standard DMX512 output interface. ArtNet-DMX highly compliant protocol standards, real-time, stable and reliable. It has been designed through a Ethernet DMX transmission, it has two Operation Mode: INPUT MODE (SERVER MODE), and OUTPUT MODE (NODE MODE). In OUTPUT MODE, the device via the Ethernet receives Art-Net signals and convert to dmx512 signals. In INPUT MODE, the DMX512 signal is converted to Art-Net signal and be transmitted over the Ethernet. ArtNet-DMX4/8 factory-configure an IP address of 2.xxx and a subnet mask of 255.0.0.0, there is generally no need to amend, you can plug-and-play. Users or special network configuration can be modified using a PC configuration tools and WEB browser. Plug Type:EU Plug,it applies to Indonesia, Germany, France, Spain, Italy and so on. Voltage: AC220V Color: As Shown Material: Aluminum Alloy Package Contents: 1 x 4 Port 5Pin Artnet controller 1 x internet cable 1 x U Disk (Inside have software and manual book) 1 x power cable Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.