Feature:1. HIGH PRECISE: This soil temperature humidity sensor uses 4X series chip, has low power consumption and high precise, with humidity accuracy up to ±1.5% RH and temperature accuracy up to ±0.1℃.2. 3.3V POWER SUPPLY: With a maximum power supply voltage of 3.3V, this digital soil temp sensor is perfect for mobile and battery driven applications, features digital output, the resolution is up to 14 bits.3. I2C INTERFACE: This temperature humidity probe sensor has fully calibrated digital output, and with I2C interface, easy to integrate, making it highly functional.4. WIDELY APPLICABLE: This soil detection sensor is practical for use in a range of applications, including server room monitoring, HVAC systems, weather stations, warehouses, and soil moisture measurements.5. COMPACT AND LIGHTWEIGHT: With its small size and light weight, this soil moisture sensor is easy to carry and install, taking up minimal space.Specification:Item Type: Soil Moisture SensorShell Material: Stainless SteelModel: FS200 SHT45Working Current: <10mAHumidity Accuracy: ±1.5% RHTemperature Accuracy: ±0.1℃Working Voltage: 3.3VTemperature Measurement Range: -20℃ to 100℃Humidity Measurement Range: 0-100% RHCommunication Interface: IICWorking Conditions: -40℃ to 125℃, 0-99% RHStorage Conditions: -20℃ to 80℃, 0-95% RHProtection Grade: IP67 WaterproofLine Length: Approx. 150cm/59.1in.Package List:1 x Soil Moisture SensorNote:Note:The relative humidity of air is function of temperature, air temperature has a great impact on relative humidity, various compounds such as acids, alkalis, and salts have a significant impact on the physical properties of water steam. The following precautions should be taken when using:1. The temperature and humidity sensor should be installed in a place where the temperature is relatively stable and can best represent the measured ambient temperature and humidity.2. Avoid installing in places with drastic temperature changes.3. Avoid installing in areas with intense air flow.4. Avoid installing in dead corners where air does not flow.5. Avoid using in salt spray environments.6. Avoid using in corrosive gas environments.Working Conditions:The sensor performs normally within the recommended operating range. Longterm exposure to conditions outside the normal range, especially when humidity exceeds 80%, may cause temporary signal drift (drift +3% RH after 60 hours). After returning to normal operating conditions, the sensor will slowly self recover to the calibration state. Prolonged use under abnormal conditions will accelerate the aging of the product.