1. After installing the shower partition, it is recommended to evenly apply silicone sealant on the edges. (This product does not include silicone sealant) to make the shower partition more durable and waterproof. 2. After installing the shower partition, it must be left to stand for 30 hours. Do not let water soak the water bar. Wait for the silicone sealant to harden before using it. 3. Our shower partition can be installed on the floor or sink, the outer edge of the countertop, and the gap between the countertop and the wall, solving the problems of debris entering the gap (1 - 10 mm), water leakage, and dripping. 4. The shower partition is only 18 mm high, which will not cause tripping or trouble on the countertop and is easy to move. The foldable shower partition is very suitable for all smooth floors and countertops. For example, kitchen countertops, sinks, bathroom doors, bathroom corners, bathtub edges, washbasins, window sills, balconies, the edges of washing machines, and the bottoms of toilets, forming an anti - overflow barrier, effectively insulating heat and keeping the floors and countertops clean. 5. The shower threshold is made of environmentally friendly elastic silicone material with a soft and smooth surface. The silicone material is waterproof and mildew - proof, easy to clean, not prone to discoloration or deformation, heat - resistant and frost - resistant, suitable for all seasons. The shower threshold and the fixing system come with adhesive, which has strong adhesion. 6. When installing the shower partition, there should be no water or dust on the floor or countertop, otherwise, it will affect the adhesion of the adhesive. You can cut it to the required length with a knife, then tear off the adhesive, paste it on the surface, and finally press it. (When the shower room needs to be flipped, it is recommended to align it at a 45 - degree angle first and then connect it at a 96 - degree angle for greater stability and durability).