This Arduino-based (Atmega328P) Rgb Led Matrix Driver Platform-based amplifies three 8+6-bit channels with hardware Pwm control thanks to its LED driver. Its design allows you to easily modify or write firmware using Arduino id... Basic product information: •• Instruction manual Language: English •• Primary colors: Black •• Additional colors: White •• Depth Unit: 7.5 Cm •• Weight Unit: 56 G • Technical data: •• Specifications Kit & modules: Features Support for 8 bit colors with 6 bit correction for each color in each dot Hardware 16 Mhz Pwm Support Without any external circuits, play and shine Dedicated Gpio and ADC interface Hardware Uart and Iic communication with easy cascading 24 constant current channels of 100 Ma each 8 Super Source driver channels of 500 Ma each The driver board is based on Atmega328 and works with ID •• Specifications Additional kits and modules: Module dimensions: 60 X 60 X 16 Mm Microprocessor: Atmega328P Indicator: Pwr State Power supply: 5 to 7.5 Vdc Cascade Power Connector: Terminal Block Program Interface: Uart/Isp (Vma440) Expansion Sleeve: 100 Mil Bent Pin Header Pairs Communication Protocol: Uart/Iic Power Consumption (Except LED Matrix): Max. 40 Ma Drive Current (Each Channel): Max. 500 Ma Drive Current (Each Point): Max. 58 Ma Circuit Response Time: 10 Ns Rgb Led Matrix Color Resolution Per Point: 16 M Uart Baud Rate: 9600 115200 • Operational Characteristics: •• Coding Level: 3 •• Electronics Skill Level: 2 •• Mechanics Skill Level: 1 •• Soldering Skill Level: None.