Relay Remote Switch Single Channel Single Button Control Switch Learning Type Relay Remote DC 12V Item Type: Relay Remote Switch Material: ABS Working Voltage: DC12V Static Working Current: ≤10mA Working Temperature: -40℃—+80℃ Receiving Sensitivity: ≥-95dB Working Frequency: 433.92MHz Output Current: ≤10A Working Mode: Inching, Self-Locking, Interlocking Output Mode: Contact Output (Controllable AC and DC) Remote Control: Buttons: Single Button Working Frequency: 433mHz Scope of Application: Widely used in many household or industrial circuits and electronic products. Remote Control Built-In Battery: Button Battery Remote Control Built-In Battery Specification: CR2016 Built-In Battery Capacity: 2 x 75mAh Operation: Clear Data: Wiring the controller, power on, and then clear the code. After pressing the learning button on the control panel 8 times in a row, all the remote controllers that have learned the code will be automatically cleared. After clearing, the remote control that has previously learned to code will no longer be controlled. Learning pairing code: 1. Jog learning method: press the control panel pairing button once, the LED indicator flashes once, and after the LED indicator lights up, press the remote control button that needs to be paired, and the control board LED indicator flashes 3 times in a row The code pairing is successful. 2. Self-locking learning method: Press the code matching button on the control panel twice, the LED indicator flashes 2 times. After the LED indicator lights up, press the remote control button that needs to be coded, and the control panel LED indicator flashes 3 times in succession. 3. Interlocking learning method: Press the control panel pairing button 3 times, the LED indicator flashes 3 times. After the LED indicator lights up, press the remote control button that needs to be paired, and the control panel LED indicator flashes 3 times continuously. 4. Learning method with a delay of 5 seconds: Press the code matching button on the control panel 4 times, the LED indicator flashes 4 times. After the LED indicator lights up, press the remote control button that needs to be coded, and the control panel LED indicator flashes 3 times in a row. The code is successful. 5. Learning method with a 10-second delay: Press the control panel pairing button 5 times in a row, and the LED indicator will flash 5 times. After the LED indicator lights up, press the remote control button that needs to be paired. The control panel LED indicator flashes 3 times in a row and the code is successfully matched. 6. Learning method with 15 seconds delay: Press the code matching button on the control panel 6 times continuously, and the LED indicator will flash 6 times. After the LED indicator lights up, press the remote control button that needs to be coded, and the control panel LED indicator flashes 3 times in succession. If you want to change the mode, please clear the data: After pressing the learning button on the control panel 8 times in succession, all the remote controllers that have learned the code will be automatically cleared. After clearing, the remote control that has previously learned to code will no longer be controlled.