1. Pull out the plastic inner cylinder, pour water into the silicone container, a little more than 2 grids, no more than 2 and a half grids. step 2. Slowly insert the inner cylinder with the cover into the silicone cavity, pay attention to screw it to the bottom and hold it down, then gently pinch the silicone surface under the cover to ventilate the inner cylinder until the inner cylinder doesnot float. Steps 3. Leave the mold at room temperature for a few minutes; if you dont want to wait for pressing hard, you can pour an appropriate amount of hot water into the inner cylinder, pour out the hot water for about 10 seconds, and then easily pull out the innercylinder 4. Press the silicone on the outer wall and adjust the angle continuously to take out the ice cube 1. The size is just right. 3cm ice cubes - suitable for quick cooling drinks, and can also guarantee about 10 minutes of ice cube time, too large ice cubescool down slowly, and too crushed smoothies will melt in a minute or two quantity of delivery: 1 piece (Package contents: Only the above package contents, excluding other products.) size:8*9cm (Reminder: The size is measured manually, please allow 1-2 cm measurement error) color:blue green colors (Due to different monitors and lighting effects, the actual color of the item may be slightly different from the color shown on the picture.) Products from LUOLV's store