REFLECTIVE WARNING TRIANGLE ECE R27-032734 Warning triangle. Dimensions : 43cm x 43cm x 43cm. Mandatory equipment for every motor vehicle. Material: plastic reflector, PVC inside triangle. Base material: 4 metal rods. Case material: plastic. Easy and quick to assemble . Folded into 3 arms with a latch. Conformity mark : ECE R27-032734. Product weight: 0.5 kg. Made in China . The warning triangle is used to indicate an obstacle to land traffic, e.g. when stopping the vehicle in prohibited or dangerous places. Dimensions of the unfolded triangle : 43cm x 43cm x 43cm. Length of the base bars : 35 cm. Case dimensions : 44.5 cm x 4.8 cm x 3 cm. Description : Steel bars folded with plastic hinges - 4 pieces. A case for storing a triangle. Where to place the triangle? A breakdown of the car should be signaled by turning on the hazard lights. The correct distance at which the reflective triangle should be placed on the road behind the vehicle is important. The place where the vehicle stopped plays a big role here: in a built-up area , we signal parking when it is prohibited, and we place a warning triangle behind the vehicle at a distance of not more than 1 m . If the car does not have hazard lights, turn on the position lights; outside the built-up area , in addition to turning on the lights, we must know that we park the car as close to the right edge of the road as possible, and the warning triangle at a distance of 30 to 50 m behind the vehicle ; on expressways and motorways, we stop the vehicle on the roadside and place the warning triangle 100 m behind the vehicle .