Motorcycle Alarm Remote Start Central Locking System with Mobile APP Control System Electric Motor Lock Motorcycle Siren Alarm, Burglar Alarm -- Motorcycle Alarm Remote Start System Keyless Entry with Mobile APP Control System Electric Motor Lock Motorcycle Alarm Siren, Anti-Theft Alarm Function Description: 1. Remote Anti-Theft Press the remote key lock once, the turn signals flash once and the horn sounds once to enter the state anti-theft. At this time, the vibration sensor works and the motorcycle engine enters the flame-locking state, the vehicle cannot be started. 2. Release the remote control Press the "Unlock" button on the remote control once, the turn signal flashes twice, and the horn sounds twice to remove the theft deterrent. Open the vehicle key manually to start the vehicle normally. 3. Silent Anti-Theft Press the "Mute" button on the remote control once, the turn signal will flash once and the horn will sound once. Press the "Mute" button on the remote control again three seconds later, and the turn signal will flash once, but the horn will not sound, and the system will enter the silent anti-theft state. If a vibration alarm occurs, the turn signal indicator will flash and the horn will not sound. 4. Start your vehicle remotely Press the remote control's mute button twice and the motorcycle engine will start immediately. You can drive normally without manually opening the key. In the remote start driving system, press the "Mute" button on the remote control once to turn off the engine remotely. 5.Remote Press the "Search" button on the remote control for 2.5 seconds, the turn signal flashes 5 times and the horn sounds 5 times to search the car. Specifications Voltage: 12V 2V Static current: less than 15mA Frequencies: 433.92MHz Code: learning code Distance: about 60-80m Remote control battery: CR2016 6V (excluding) Scope of application: applies to all 12V motorcycles, suitable for starting models AC App and remote control matching: Turn on the motorcycle app and the prompt will appear. Turn on your mobile phone's Bluetooth switch. A green dot on the Bluetooth icon in the interface indicates that Bluetooth has been turned on. Click the gear icon in the upper right corner of the interface to enter the setting interface. Press the learn code key once, then press the remote control button and two keys at the same time, then return the app from the setting interface to the main interface. Press a key on the interface and the host rings once to indicate successful learning. (Note: When pairing, the mobile phone APP, remote control and host are completed within 5M.) APP use: All functions of the remote control can be realized by clicking the buttons on the interface. No mobile network is required and the control distance is about 30M. (Different brands of mobile phones may have different controls due to different Bluetooth versions.). Special APP Features: (1) Shake the switch lock: Open the mobile phone APP, click the gear icon in the upper right corner of the interface to enter the setting interface. Slide the rocker switch lock bar, prompt you to select the third gear force, select the appropriate force, complete the setting and return to the main interface. The switch lock function is realized by shaking the mobile phone. (2) multi-person application sharing: Due to security requirements, the host only stores one mobile phone information. However, it can be used by multiple families by sharing authorization codes. Open the mobile phone APP, click the gear icon in the upper right corner of the interface to enter the setting interface. Click on the authorization code and a string of characters will appear. Save the characters. On another mobile phone with the application installed, you can control the same car by entering the settings interface and changing the local authorization code to the previous one. Package List: Host * 1 + Speaker * 1 + Connection Cable * 1 + Remote Control * 2