Manual Thermostat Switch Temperature Controller for Home Floor Heating 220V

1、The manual thermostat is designed for electronic floor heating and other electrical heating elements 2、It controls the temperature with an NTC sensor placed externally 3、The thermostat gets the room temperature through its floor sensor, and the heating contact will close when the room temperature rises above the set point, and vice versa 4、It fits into the standard single switch back box well, and is worldwide suitable 5、Automatic safety power switch, on/off control output for heating device Features: The manual thermostat is designed for electronic floor heating and other electrical heating elements. It controls the temperature with an NTC sensor placed externally. The thermostat gets the room temperature through its floor sensor, and the heating contact will close when the room temperature rises above the set point, and vice versa. It fits into the standard single switch back box well, and is worldwide suitable. Automatic safety power switch, on/off control output for heating device. With manual switch and knob for easy operation, no need to work out how to programme. LED indicator is light when heating is on. Specification: Condition: 100% Brand New Power Supply: 220V 50HZ Power Consumption: 5W Adjusting Range: 5℃~40℃ Difference per Temperature: ±1℃ Operating Temperature: -5℃~50℃ Level of Protection: IP20 Housing Material: self-extinguishing PC Floor Sensor: NTC Sensor 3 meters Setting Temperature: 5-35℃ Working Environment Temperature: -5-60℃ Resistive Load: <3A Inductive Load: <2A Size: Approx. 9*8.5*5.5 cm / 3.5*3.3*2.2 in Weight: Approx. 178g / 6.3 oz Package list: 1 * Thermostat 1 * Cable 2 * Screws 1 * User Manual Note: 1. Please allow 0-1 inch error due to manual measurement. Thanks for your understanding. 2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.