1、200W power adapter board, using high‑quality PCB material, high performance, high heat resistance, more reliable to use. 2、Eliminate 24 unnecessary wires by plugging directly into the motherboard ATX connector. 3、It is suitable for small ATX boards to save space in the case without affecting power requirements. 4、With over‑current protection and short‑circuit protection: when the output current reaches the peak current, the output is turned off. When the output is short‑circuited, the output is turned off. 5、Suitable for MINI computers, for HTPC computers, for POS machines, ITX cases, network servers, industrial control systems, etc. 1 x Power Adapter Board Item Type: Desktop Computer Power ModuleMaterial: PCBModel: LD-A200WLPower: 200WInput Voltage: 17-24VOutput Voltage/Maximum Load: +5VSB/2A, +5VDC/8A, + 3.3VDC/8A, +12VDC/12A, -12VDC/ 0.15AOperating Frequency: IC built-in oscillator (250-350) kHz at Vcc-12VFeedback Reference Voltage: 0.8V±2% at 12VDCInterface: 1 x ATX24Pin, 1 x CPU4+4Pin, 1 x for SATA, 1 x IDE, 1 x DC5525Cable Length: DC Cable: Approx. 320mm/ 12.6inCPU Cable: Approx. 210mm/ 8.3inIDE Cable: Approx. 200mm/ 7.9infor SATA Cable: Approx. 150mm/ 5.9inProtection Function (for + 3.3V, +12V, + 5.00V and + 5.00VSB power output)Overcurrent Protection: When the output current reaches the peak current, the output is turned offShort Circuit Protection: When the output is short circuited, the output is closedWorking Temperature/Humidity: -5 - 55℃/45% - 75%Storage Temperature/Humidity: -40℃  - 70℃/10% - 90%Applications: for MINI computers, for HTPC computers, for POS machines, for ITX cases, for web servers, advertising machines, bank terminals, low-power systems, industrial control systems, etc.