Item Type:Switch Type :Normally Opened Contact Load:220VAC 1.5A or 24VDC 1.5A Insulation Resistance: Normal Temperature And Humidity 50M Temperature:40 / 45 / 50 / 55 / 60 / 65 / 70 / 75 / 80 / 85 / 90 / 95 / 100 / 105 / 110 / 115 / 120 / 125 / 130(Optional) Contact Resistance: 100 M Electric Strength: 500VAC Package List 1 x Switch 1. When using contact temperature sensing, the metal cover should be close to the mounting surface of the controlled appliance. To ensure the temperature sensing effect, the temperature sensitive surface should be coated with thermal grease or other similar heat transfer medium. 2. Do not crush, loosen or deform the top of the cover during installation to avoid affecting performance. 3, can not let the liquid penetrate into the temperature controller, do not crack the shell, do not arbitrarily change the shape of the external terminal. 4. The product should be used in a circuit with a current of no more than 5A. The copper core should be selected from 0. 5-1mm2 wire connection; if the circuit is not more than 10A, the copper core should be 0.75-1.5mm2. connection. 5. The product should be stored in a warehouse with a relative humidity of less than 90% and an ambient temperature of 40 C below, which is ventilated, clean, dry and free of corrosive gases. 1The switch is a normally open switch,connect only when temperature standard is reached, otherwise disconnect. 2The contact can withstand 220VAC 1.5A or 24VDC 1.5A voltage. 3High insulation resistance more than 50MOhm in ambient temperature and moisture. 4Stable performance, high accuracy, small size, light weight. 5High reliability, long life, and little interference to the radio. 6Suitable for power supply, testing equipment, refrigeration, air conditioning, printed circuit board.