Product description:Colour-deepening stone refinement to retain the value of absorbent natural and artificial stones. Moisture, oils, greases and aggressive dirt can no longer penetrate. Moss, algae, mold and efflorescence no longer find a breeding ground. Dirt caused by oil and grease splashes, wet leaves, fruit stains, coffee, red wine, etc. are much easier to remove. Also ideal for bridging leaks or hairline cracks (up to approx. 0.2 mm). Application:for: colour retention, structure preservation, algae, lichens, moss, mould, efflorescence, moisture (e.g. due to wet leaves), dirt, paints, oil, grease, staining, fruit stains, coffee, red wineProperties: Penetrates deep into the surface and forms a wafer-thin protective film in the capillariesColour and structure of the stone come into their ownAlgae, lichens, moss and mould no longer find a breeding ground in the long termProvides deep protection against staining and simplifies CleaningFlexible processing options: With roller, sprayer or brushInstructions for use:The surface to be treated must be dry, clean, stain-free and absorbent. Use only on unpolished and unsealed surfaces. The optimal processing temperature is between +10 °C and +25 °C. Do not apply to highly heated surfaces. Protect Color is applied sparingly and evenly pure using the spray (pressure syringe, spray bottle) or painting process (brush, foam roller, microfibre cloth or microfibre mop). Do not apply too richly. Wipe off excess material completely with a cloth before drying. The product must not come to a standstill on the surface. (It must be completely absorbed.) For weakly absorbent surfaces, apply Protect Color only wafer-thin and apply with a microfibre cloth / microfibre mop. When treating vertical surfaces, drop-shaped run-off should be avoided. Drip noses must be removed immediately. The colour recess is usually immediately visible. In the case of highly absorbent substrates, a second application may be necessary until visual saturation occurs. Always allow a waiting time of approx. 10 minutes between the individual impregnation processes. If processed properly, the drying time is approx. 30 minutes.Use the product only undiluted. Only treat completely dried out coatings. For newly laid areas, a waiting period of approx. 8 weeks should always be observed. After a rain shower, wait about 3 days. Do not apply in strong sunlight, strong winds or rain. Do not bring into contact with glass surfaces. The freshly treated area should be protected from rain for at least 24 hours. After 24 hours at the latest, the area is fully loadable. When used indoors, sufficient ventilation must be provided. The colour-deepening effect is strongly dependent on the base colour, structure and absorbency of the covering and is sometimes only clearly visible after repeated application on extremely absorbent surfaces. Not all stones are the same: We therefore recommend that you carry out a test order at a suitable location due to the different properties. In the event of improper handling, any liability for any damage expires.Coverage: approx. 5–25 m2 / litre – depending on the absorbency of the substrate. The consumption is halved for the second order.Manufacturer's ref.: H 220 120 005Package size: 5 litre canisterImportant information: