Hollow aluminum rivets M3.2 traction rivets 30*5.4mm30*6.4mm30*8mm30*10mm40*12mm Standard Blind Rivet with Milled Head presents a fantastic range of standard blind rivets with countersunk head. Designed to be easily installed and able to fix joints with short clamping lengths, these rivets are designed to create a permanent mechanical fixture, they extend into a pre-drilled hole to create a strong and solid retainer. The blind rivet can be installed entirely on one side of the material when access is limited to fastening, unlike machine screws and nuts. These rivets are particularly suitable for situations where an interference-free fit is required. Made of aluminum to ensure weathertightness and corrosion resistance to extend the life of your rivets while keeping them lightweight and sturdy. These aluminum rivets feature a wide range of handles with excellent load distribution adjustment and a chuck locking system. Used mainly in white goods, electronics and heating, ventilation and air conditioning and storage solutions. Features and benefits Made of aluminum for strong rivets and structural strength Easy and clean installation Can be used when only one side of the application Is accessible Grip range increased from 4 to 6 mm Creates a permanent, high-tensile strength structural rivet joint Low effortBody length: 8 mm Applications Rivets are mechanical fasteners that consist of a smooth cylindrical axis with a head on one end and tail at the opposite end of the head. On installation, a riveter places a rivet in a pre-drilled hole, and the tail is adjusted or plugged (i.e. deformed) with a rivet gun, rivet tool or pneumatic hammer so that it extends up to 1.5 - 2 times the original axis diameter, holding the rivet in place. They are used to permanently join two steel, aluminum or copper plates, usually in mechanical applications where it is imperative that the joints do not loosen or cause failure. As they are rivets with a countersunk head, they are perfect for environments where an interference-free finish is required.