DC DC Boost Step up Module High Voltage 45-390V Continuously Adjustable for Capacitor Charging Item Type: Boost Module Module Name: High voltage boost module Module Nature: Non-isolated booster module Input Current: 5A(maximum) Static Working Current: 15mA (When 12V rises to 50V, the higher the output voltage, the higher the static current will increase) Output Voltage: 45-390V continuously adjustable Output Current: 0.2A, maximum(related to input and output voltage difference, the higher the output voltage, the smaller the output current) Output Power: 40W (peak 70W) Working Temperature: -40~+85 degrees (please strengthen heat dissipation when the ambient temperature is too high) Working Frequency: 75KHz Conversion Efficiency: Up to 88% (efficiency is related to input, output voltage, current, pressure drop) Short-Circuit Protection: Yes (input 10A fuse, please do not short-circuit the arc directly at the output end! Direct short-circuit and arc may damage the rectifier device, if you want to short-circuit and arc, please series power resistance current limiting) Overcurrent Protection: Yes (input current exceeds 4.5A, reduce output voltage) Overvoltage Protection: Yes (output voltage exceeds 410V, reduce output voltage) Input Reverse Connection Protection: Yes (non-self-recovery type, connect reverse burn fuse, try not to reverse) Installation Method: 4 x 3mm screws Wiring Method: Welding terminal free welding output (with welding output shell) Module Size: Approx. 60 x 50 x 22mm / 2.4 x 2 x 0.9in(length x width x height) The Measured Data of the Charging Time of the Capacitor: 470uF full to 390V for 2 seconds 1000uF full to 390V for 4 seconds 2200uF full to 390V for 8 seconds 4700uF full to 390V for 18 seconds Application Range: 1. Capacitor charging, electromagnetic gun power supply 2. Power supply for your electronic equipment, you can set the output value according to your system voltage 3. Withstand voltage test power supply, glow tube power supply 4. Hunting and rodent killing