G3/4 Sprinkler Timer IP65 Waterproof Large LCD Display Digital Irrigation Controller with Copper Adapter Item Type: Sprinkler Timer Material: ABS Product Size: Approx. 15.8 x 9 x 5cm / 6.2 x 3.5 x 2in Weight: Approx. 349g/12.3oz Battery (Delivered Without Battery): 1.5V, 2 x AA Battery Tap Connection: G3/4 Female Thread Outlet: G3/4 Male Thread Applicable Water Pressure: 1-8kg/2.2-17.6lb Working Flow: 500-1700L/hWater Temperature: 1-50℃ Power Consumption: <1W Working Pressure: 0.2-0.8MPa Waterproof Grade: IP65 Note: The orange connector on the internal thread of the irrigation controller is removable. After disassembly, the host interface is G1 female thread, and the orange connector is G3/4 female thread after installation. Applicable to: Automatic Control Products for Courtyards, Balconies, Family Green Wall, 3D Greening Micro Sprays, Droppers, and Infiltration Irrigation. Setup Steps： 1、For the first time, press "ESC, off" to enter "time" to set the current time, press "Up" or "Down" to set the hour, press "setup, OK" and then press "Up" or "Down" to set the minute, and then press "setup, OK" once to end the setting. 2、Automatically enter "start" to set the opening time, press "Up" or "Down" to set the hour, press "setup, OK" and then press "Up" or "Down" to set the minute, and then press "setup, OK" again to end the setting. 3、Automatically enter "how long" to set the watering duration, ranging from 1 minute to 599 minutes, the maximum is 9 hours and 59 minutes. Press "Up" or "Down" to set, and press "setup, OK" once to end the setting. 4、Automatically enter "how of ten" to set the watering frequency, with an interval of 1-30 days, press "Up" or "Down" to set, and press "setup, OK" once to end the setting. 5、If manual temporary watering is required, press "manual" and then press "Up" or "Down" to set the watering duration, and press "setup, OK" once to complete the setting. To stop watering manually, press "ESC, off" to start the automatic mode. 6、When there is no setting on the full screen (relevant setting items do not flash), press "Up" or "Down" to view the four timing programs from "P1" to "P4"; press "setup, OK" at any time to set the timing. 7、All setting interfaces automatically complete the setting after 8 seconds