Fusion Splicer Machine Touch Screen Automatic Optical Fiber Cleaver Welding Kit Blue 100‑240V AU Plug Item Type: Fusion Splicer Applicable Fiber: SM(G.652 and G.657), MM(G.651), DS(G.653), NZDS(G.655) and custom fiber types Connection Loss: 0.02dB (SM), 0.01dB (MM) 0.04dB (DS/NZDS) Return Loss: Better than 60dB Typical Connection Time: 9 Seconds Typical Heating Time: 26 Seconds (heating time can be set, heating temperature can be adjusted) Fiber Alignment: Fine alignment, core alignment, cladding alignment Fiber Diameter: Cladding diameter 80~150μm, coating layer diameter 100~1000μm Cutting Length: Coating Layer Below 250μm: 8-16mm; Coating Layer 250~100um: 16mm Tension Test: Standard 2N Optical Fiber Jig: Multifunctional jig, applicable to bare fiber, pigtail, jumper, leather wire; The replacement fixture can be applied to SC and other connectors for various FTTx fiber optic cables Magnification: 400X (X or Y axes) Heat Shrink Bushing: 60mm, 40mm and a series of miniature bushing Display: 5.0in TFT color LCD display with reversible contents for easy two way operation External Interface: USB interface, easy to download data software update Welding Mode: 17 Groups use mode Heating Mode: 9 Group use mode Connection Loss Storage: 5000 Latest connection results are stored in the internal memory Battery Life: Continuous welding, heating not less than 200 times Power Supply: 1 x 6400mAh rechargeable lithium battery, charging time ≤3.5H Power Saving Function: Save 15% lithium battery power under typical environment Working Environment: Temperature: -10~+50℃, Temperature: <95%RH(no condensation), Working Altitude: 0~5000meter, Maximum Wind Speed: 15m/s Lighting Function: Easy to place optical fiber at night Color: Blue