Full HD reversing camera 120 ° | 4 PIN The camera is designed for car cameras, DVR recorders and driving recorders in the mirror. The housing has an IP-68 tightness class, thanks to which it is possible to mount it outside the car , which in turn provides a clearer image than in the case of cameras mounted inside the vehicle, e.g. on the rear window. The camera has a night mode. Attention! The camera is compatible with virtually all video recorders that have a 2.5mm jack input and a 4-pin cable The camera fits many different models , but in the case of low-end devices, it may turn out that the recorder's video processor is not able to process the image with Full HD resolution. Product information It is one of the few cameras that can record in Full HD quality Other standard cameras, e.g. with LEDs offer VGA 640x480 quality and do not have a night mode. The camera is compatible with virtually all DVRs that have a 2.5mm Jack input and a 4-pin cable. Starlight Night Vision The built-in Starlight Night Vision mode allows the camera to operate smoothly in the dark, and the recorded image will have much better quality than in standard cameras equipped only with LEDs. Sony 1409 SNV sensor It is one of the best sensors used in this type of cameras. Provides high image quality in all conditions. 6 layer glass lens Thanks to the use of 6 layers of glass, there is no lens evaporation in the camera. This solution provides a clear and transparent image regardless of the time of day and year. Connection The cable included in the set has a 4-PIN plug - the reversing camera should be connected to it. The red signal wire is to activate the camera - connect it to the reverse light. Technical Specifications Sony 1409 SNV sensor 120° viewing angle Full HD resolution Color image by day, black and white by night 12V power supply IP-68 protection class Video cable length 550 cm The length of the power cord is 120 cm Cable length at the camera 50 cm Included FHD reversing camera 4 PIN cable with power cord