specification:Item Type: OBD2 Emulator_x000D_Material: ABS_x000D_For Vgate vLinker MC WiFi for Android, for iOS and for Windows_x000D_Description:_x000D_Recommended by for Bimmercode, for FORScan for iOS, for Android, and for Windows._x000D_Fully compatible with ELM's AT command set (for ELM327, for ELM329) and STN's ST command set._x000D_For Vgate vLinker MC WiFi won't drain your battery if you leave it plugged in. Operating Current is 24 mA, automatic sleep in idle state, sleep current is as low as 3mA_x000D_KEY FEATURES:_x000D_UART data buffer up to 2K bytes, baudrate increased to 460.8Kbps. Faster, more reliable, and more feature rich than its predecessors._x000D_OBD request byte up to 1024 bytes, can meet the needs of some special long frame communication._x000D_Supports SW CAN and MS CAN protocols - can access these proprietary replacement for Ford networks in addition to the 5 standard OBDII protocols._x000D_TP transmission protocol, Ensure wireless communication security._x000D_Battery Saver technology - Innovative sleep function lets you leave it plugged in without danger of draining your car's battery._x000D_Superior compatibility - works with more 3rd party apps and software than any other adapter._x000D_Supports battery voltage drop, OBD bus active, key, etc. Up to 4 ways to wake up from sleep mode._x000D_Over voltage, over current, over temperature and battery drain protection, firmware updates_x000D_Fully compatible with ELM's AT command set(for ELM327, for ELM329);_x000D_Fully compatible with STN's ST command set;_x000D_Upgraded version of for iCar pro, specifically for coding APP that requires large amount of data transmission_x000D_For vLinker MC for WIFI is a diagnostic scan tool, trip computer, logger, and real time performance monitor. This pocket size adapter won't obstruct driver legroom and features unparalleled performance, intelligent sleep mode, exceptional third party app support, and free lifetime firmware and software updates._x000D_For Android and for iOS Device. For detailed steps, please refer to the instruction manual carefully to avoid operating errors._x000D_For Android System Operation Steps _x000D_1. Insert the product into the OBD interface of the car._x000D_2. Turn ignition to Key On Engine Off Position._x000D_3. Turn on WiFi on the phone._x000D_4. Search for the device name vLinker MC and connect._x000D_5. Note: You need to click Decline when your phone displays the prompt as in Step 5. Otherwise the connection will fail. (You can not use network when connect WiFi.)_x000D_6. If the connection is successful, you can open the APP to set up the connection._x000D_For iOS System Operation Steps _x000D_1. Plug the product into the OBD2 interface of the car._x000D_2. Turn ignition to Key On Engine Off Position._x000D_3. Turn on WLAN on the phone._x000D_4. Search for the device name vLinker MC and connect._x000D_5. If the connection is successful, you can open the APP to set up the connection._x000D_NOTE: In the steps of APP operation, since different APPs have different setting and connection steps, please operate according to the relevant information on the APP's official website. Features: 1Practical OBD2 Scanner: For ADBlue OBD2 emulator is a diagnostic scan tool, trip computer, logger, and real time performance monitor. 2Compatible Protocols: Supports SW CAN and MS CAN protocols, can access these proprietary replacement for Ford networks in addition to the 5 standard OBDII protocols. 3Fast Response: UART data buffer up to 2K bytes, baudrate increased to 460.8Kbps. Faster, more reliable, and more feature rich than its predecessors. 4Battery Saver Technology: The innovative sleep function lets you leave the diagnostic scan tool plugged in without danger of draining your car's battery. 5Safe and Reliable: Including over voltage, over current, over temperature and battery drain protection, firmware updates, safe and convenient to use. PackageList:1 x_x000D__x000D_OBD2Emulator