Feature:1. The ETCR200FA flexible coil current sensor is composed of a coil and a handle, and the coil part has no exposed metal conductors, non contact measurement, safe and reliable.2. It is small in size, light in weight, exquisite in appearance, soft and flexible, and is suitable for narrow environments and places with dense cables.3. Using advanced technology, it is a toroidal coil that is evenly wound on a non ferromagnetic material, with no hysteresis effect, almost zero phase error, no magnetic saturation, and extremely high linearity.4. The output signal is the differentiation of current to time. By integrating the output voltage signal, the input current can be truly restored, and the measurement current range can be from milliampere to tens of thousands of amperes.5. Used for detection of AC leakage current, large current, high order harmonic current, complex waveform current, transient impulse current, phase, electric energy, power, power factor, etc.Specification:Item Type: Flexible Coil Current SensorMaterial: ABSColor: As shown in the pictureModel: ETCR-200FA Application: AC current detectionFunctionDetection of AC leakage current, large current, high order harmonic current, complex waveform current, transient inrush current, phase, electric energy, power, power factor, etc.Detection methodFlexible coil CT: The output signal is the differentiation of current with respect to time. By integrating the output voltage signal, the input current can be truly restoredCoil diameter7.5mmQuantity process0A~10000A~higherResolution10mAAccuracy class1.0%FS (50Hz/60Hz; 232, below 70%RH, the wire is at the center of the coil)Phase error0.1(50Hz/60Hz; 232)Output Interface3.5mm audio frequency plug/BNC plug/tapElectric field interferenceNo hysteresis effect, no interference from external electric fieldWire positionThe wire to be tested is at the center of the coil, and the position error affects 0.3%FSCurrent frequency45Hz~70Hz (frequency of measured current)Response frequency0.1Hz~1MHzLine voltageLine test below AC 1000VWorking temperature and humidity-20~50; below 80%rhStorage temperature and humidity-10~60; below 70%rhDielectric strengthAC 2000V/rms (both ends of the coil after unlocking and unfolding)Suitable for safety regulationsCAT IV 600V, CAT III 1000V.Package List:1 x Flexible Coil Current Sensor