Description INSTRUCTION MANUAL 24 HOUR, 7 DAY DIGITAL TIMER WITH RANDOM AND DST TIME This unit is a direct plug-in timer intended to control electronic power of the device. Features: -- 8-key timer function -- Time setting includes HOUR, MINUTE and WEEK . -- Daylight saving time change -- random function --- -- 12 hours/24 hours changeable This timer is a timer direct plug-in intended to control the electronic power circuit of the device.1. Initial operation 1.l Press the RESET key to finish filtering all systems within 6 seconds. 1.2 Use a sharp object (e.g. pencil) to press the RESET key to delete all the information you configured before. 2. Veek key for on and off time_After pressing the TIMER key to enter the setting state: 2.1 Press the WEEK key to choose the group of days you want to turn on the device. TU WE THFRSASUMOTU WETH FRSAMO WEFR TUTHSA MO TU WETH FR SAMOWE FR DI. 2.2 Press the HOUR key of 0-23 or 1~12 once . 2.3 Press the MINUTE key once from 00 to 59. 2.4 When it is in the setting state, it will Runs in current time if not pressed within 20 seconds. 2.5 Be sure to press the RESET/RECALL key to reset or cancel all systems. Note: By pressing the HOUR or MINUTE or TIMER button for more than 3 seconds, a rapid cycle is performed 4 times per second. 3. Clock function In timer status: 3.1 The LCD displays weeks, hours and minutes, e.g. 12 hours will be carried out AM or PM. 3.2 Press the CLOCK key with the simultaneity WEEK execute MO-SA. 3.3 Press the CLOCK key with HOUR simultaneously, do 1~12. 3.4 Press CLOCK key with MINUTE simultaneously, do 00-59. 3.5 Press CLOCK key with TIMER simultaneity, 12 hours / 24 hours modifiable. 4. Changing DST You can easily change DST using this function.4.1 To switch to DST from current time /p Hold the CLOCK key with the ON/AUTO/OFF keys simultaneously to change the current time to summer time. The LCD will show SUMMER and the current time will be advanced one hour. 5. Random function 5.1 Press and hold the RANDOM button: the LCD screen will show the RANDOM sign to remind the user that the random function is actually active from 6:00 p.m. to 6:00 a.m. 5.2 To cancel the random function, just run stcp 5.1, and the RANDOM sign will disappear from the LCD. 5.3 Random function time for 1-2 hours, that is- i.e. the activation or deactivation time is 60-120 minutes per oncc. 6. Manual operation The LCD displays the output status as AUTO: Under the setting state, it is in ON or OFF state. ON: The unit is computer controlled in ON state. OFF: the unit is continuously monitored in OFF state. ONAUTOOFF Special technical data: Tension : 230 V~/50 Hz Installation: Pluggable type Rating: 230 V~AC/16 A/3680 wSetting time: 1 minute Operating temperatures: -10...+40C Accuracy: 1 min/month. Battery: NIMH1.2V100hrs. Attention: No service parts inside.