1 x Timer1 x English Manual Advanced preset one week ahead.Digital electronic general purpose clock with daily and weekly schedules.Repeat schedules with 16 ON and 8 OFF settings.Setting accuracy down to the minute.LCD displays real-time hours/minutes and ON/AUTO/OFF. Features: Input voltage: AC220VRated contact voltage: AC 180V to 264V (50/60Hz)Load capacity: 25A 250VAC ( resistive load)On/off operation: 16 on and 16 off (manual/automatic) Display: LCDPower: 4.5VA (max)Error: 2s/day (25) Mounting method: DIN rail (not included)Bound: 1 min to 168 hoursOperating temperature: -10 to 55Size: 86 x 36 x 65mm / 3.38 x 1.41 x 2.56& 34;Quantity: 1 Instruction: When you use the timer switch for the first time, input AC and charge the built-in battery, then press the reset button.The timer is in 24-hour mode by default. Press and hold the & 34;time& 34; (bottom left, next to 'reset') for 5 seconds until it displays 'AM' to switch to 12 hour mode. Press the & 34;Time& 34; button again for 5 seconds to return to 24 hour mode. Programming: Step; Button; Programming Press P to set the time 1 ON (display 1 on).Press D +, select days of the week (you don't need to press this button if you want the same setting for all days)Press H+/M+, set hours and minutes.Press P to set time & 34;1 OFF& 34; (display 1 off).Press P, Select. Weekdays (If you want to use the same setting for every day, you don't need to press this button.)Press H+ / M+ to set weekdays. hours and minutes.Repeat step 2-6, Set another on/off time.Press 'hour' (bottom left, next to 'reset') Finish