ECU Programmer Power Box with Full Adapters Compatible with J2534 Pass Thru Scanner Features： 1、WIDE COMPATIBILITY: Power box is suitable for a variety of TV boxes and extractors, covering electronic control units (ECUs) of multiple vehicles and models, with extensive applicability. 2、HIGH PERFORMANCE: Power box uses high grade ABS materials, equipped with efficient circuits and guard mechanisms, ensuring safe and dependable operations, with long term stability. 3、EFFICIENT START: supports one click start, without the need for complex settings and operations, enabling quick start of vehicles' ECUs that have not been programmed with keys, and smoothly completing related operations. 4、EASY TO USE: ECU device box is easy to operate, without the need for extensive professional knowledge and skills, making it easy to complete operations, significantly reducing users' use and learning costs, and improving work efficiency. 5、SIMPLE CONTROL: ECU power box has 3 switches for different modes of operations, easy and simple control, presenting you with professional and dependable usage results. Specification： Item Type: ECU Power Box Material: ABS Description: It is compatible in the automatic mode with the loading programs which use: for BOOT-OEM12 for L-LINE The Tool has built in current limiting resistors on the following signal lines: RESET - 510 Ω, BOOT - 510 Ω, CNF1 - 220 Ω. Lights: LED near the 5V/3.3V switch indicates 5V or 3.3V voltage supply. VECU, VKEY LED indicates VECU and VKEY voltage supply. 12V LED indicates power voltage. BOOT LED indicates voltage on CNF1 output (the LED works both for input and output). Controls: The tool has 3 Switches for operating in different modes. POWER: Power control. The tool has three modes of power supply to the ECU: OFF allows to remove all power and control signals from IDC-26 and DB-15 connectors. Manual supplies power to VECU and VKEY terminals and to the control outputs depending on the chosen tactics. AUTO, automatic control, in this mode power is controlled by the loading program with L-Line signal. BOOT: Simultaneous control of BOOT, RESET and CNF1 signals (3.3V): OFF, allows to remove all control signals from DB-15 connector; MANUAL pulls RESET and BOOT to the signal minus, and CNF1 to +3.3V; AUTO, automatic control, in this mode BOOT, RESET and CNF1 signals are simultaneously controlled by the loading program (12 pin, OEM12). GPT: Used for Renesas and for Tricore with GPT CPUs. It is necessary to use 5V while working with SH705x CPUs, in other cases 3.3V is to be used. The Tool Is Fitted With Multipurpose Connectors Which Allow To Establish The Connections Flexibly USB: Designed for connecting to the computer. It is to be connected when the built-in USB-UART converter is enabled DC: Designed for powering the built-in circuit as well as the connected ECU. It is recommended to use only quality units with 12V output voltage. While reading the password, when it is impossible in the vehicle, one must note that high voltage converters in ECUs consume rather high current at the start which can trigger guard mechanism or even result in the power unit damage J2534: Designed for connecting the same name interface DB-15: Designed for connecting to the main ECU connector. It is recommended to use 14P600KT02, 14P600KT03 cables or analogous ones IDC-26: Designed for connecting directly to the ECU board or via the adapter to the special head. It is recommended to use 14P600KT06 cable or an analogous one for Tricore GPT. It is recommended to use for Flash Development Toolkit software for flashing for Renesas CPUs. Package List： 1 x Color Line Guide 1 x Color Cable 1 x Charging?Plug 1 x Box 1 x Line Sticker