Digital display temperature control seedling heating pad, spring and winter festival is the home season of this category, the use of this seedling heating pad:1, during the seedling period, put the seedling pot or flower pot on the heating pad, the product will heat to a temperature after electricity, this temperature can improve the soil temperature of the plant, so that the soil temperature of the plant is more suitable for the growth of seeds or plant seedlings, and can effectively promote the growth of plants;2, in most places abroad in winter, the ambient temperature is relatively cold, not suitable for plant growth or survival, put the plant on the heating pad, heating through the heating pad to change the plant soil temperature, but also more effectively protect the survival rate and growth rate of the plant during the winter, the product waterproof level IPX4Need to quickly double-click the SET key to enter the temperature adjustment link, the display is the temperature you set, if you need to see the heating pad temperature index process, you need to put the temperature sensor head on the heating pad, there will be temperature index changes on the display, when in use, the heating pad product must be flat, when the power is powered OFF, the display will show off. At the same time, the Fahrenheit lamp and the Celsius lamp are turned off, the heating is stopped, the temperature measurement is stopped, and the display is turned off after unplugging.3. Switch between Fahrenheit and Celsius:Press the SET key to switch the measured temperature value, and the red indicator light is off for the corresponding degrees Fahrenheit and Celsius.4, set temperature adjustment:Double-click the SET key quickly to enter the temperature setting mode, and the display screen will blink twice to indicate the temperature setting value. Press the - key to lower the set temperature and lower the value by 1 at a time; Press the + key to increase the set temperature, and increase the value of 1 at a time, the highest temperature is 45 degrees, the lowest temperature is 20 degrees, if the display 45 degrees, press the + key will not respond, you need to press the - key, the set value is not determined when the value is blinking. Long press the +- key to increase or decrease by 300ms. After 3 seconds of no operation, or press the SET key again, exit the temperature setting mode, and the set temperature value is saved. After you exit the temperature setting, the temperature of the display remains stable and enters the temperature control mode.5, this product has a memory function, in daily use, the last temperature set before shutdown, such as the temperature is adjusted to 32 degrees and then shut down, the product will automatically control the temperature to 32 degrees when the second use.Power supply: plug-inRated voltage: 220Rated power: 50Heating method: electric heating wireProduct size: 25cm*52.5cmAdditional features: FoldingSafety protection: overheating power offMaterial: PVCProduct content: 1* heating pad