Bright Color Star Projector USB Powered Sky Projection Lamp White Noise Planetary Projector Night Light Item Type: Star Projector Product Efficacy: It can be used in the aroma room of the spa to soothe and relax the body and mind, and feel the tranquility brought by the universe Remote control power supply mode: 2 x AAA batteries (Not Included) Operating instructions 1.Turn on the power. 2. Click the switch button to turn on. After turning on, the motor rotates at high speed for 1.5s and then enters the gear speed. The default RGBW light is blue, the two special effect lights are turned on and the green light is in the breathing state, and the breathing time is 10s from the darkest to the brightest. The brightest to darkest is also 10s, the white light is always on 3. Click the spin button to switch the rotation speed to the second gear (the default is one when the power is turned on); press it again to switch to the third gear; press it again to turn off the rotation, press it again to switch to the gear, and the operation repeats (every time the gear is switched) When, the motor will first rotate at high speed for 1.5s 4. Click the RGBW light button to adjust the light combination, the light color sequence is blue, and then enter the corresponding gear) red, green, white, blue red, blue white, blue green, red green, red white, green white, blue Red green, blue green white, blue red white, blue red green white, color gradient. When the 15 light colors are adjusted, turn off the light one last time, press again to return to the first light color, and long press to adjust the brightness of the light. 12 brightness, when long press the light to adjust the brightness, each brightness pauses for 1s 5. Click the special effect light button to turn on the two special effect lights (turn on by default). After the special effect light is turned on, the green color is the breathing light mode. White is always on, click the special effect light again, only turn on green, click only white, press again to turn off the two special effect lights, press again and turn on at the same time, the operation is repeated. 6. Click the music button to turn on the built in music (the power on state is off), press again to switch to the following song, press again to switch to the following song, a total of three music, after switching to the last song, switch again to turn off the music ,Long press to adjust the volume. The volume changes from small to large, and then stops at the maximum. To decrease the volume, you need to press and hold the music button again. Click the music switch when playing Bluetooth songs, and the lights will move with the music. 7. When the Bluetooth connection is turned on, the Bluetooth is automatically turned on, search for Bluetooth egogo 5 on the mobile phone, and click egogo 5 to match. At this time, the host has a beep to indicate that the Bluetooth is connected and the operation is complete. When the connection is disconnected, the host also has a beep to indicate that the Bluetooth has been disconnected. Note: When playing the built in music, Bluetooth cannot be connected. Turn off the built in music before you can enter the Bluetooth mode to connect to the Bluetooth. 8. Bluetooth restart: long press the special effect light button for 5s, Bluetooth restarts. You can reconnect the device after restarting.