Bicycle Fork Conversion Kit 15-12mm Adapter for Mountain Bikes

For Niner GT Whisky Kona Jamis Norco Felt Rose Viner Fork Conversion Kit 15-12mm 15mm to 12mm Fork Thru Axle Conversion Kit Use 12mm wheels in a 15mm fork. Converts 15x100 forks to 12x100 standard. Fitment: Compatible with most road, gravel, and cyclocross forks including: Niner (non-MTB) with 125mm axle (BSO RLT RDO) GT Grade Jamis (all models) Kona Roadhouse, Private Jake, and Jake the Snake Norco Search and Threshold Felt (all models) Raleigh Roker, Tamland, RXM, and RXC Pro Rose Backroad and Xeon Whisky #9 fork Otso Waheela (with Lithic Hiili fork) All City Cosmic Stallion (with Whisky #9 fork) Lynskey PRO CX and PRO Road forks (not PRO GR) Litespeed T5 Gravel No. 22 Broken Arrow and Drifter Foundry Overland (with Whisky #9 fork) Genesis Datum Dolan DR1 Carbonda CFR505 Hoy Alto Irpavi Principia Prologue Rapide Tomac Mesa Verde Alan Super Gravel Blue Norcro and ProSecco Advocate Lorax (with Otso Lithic Hiili fork) Bombtrack Hook 3 PlanetX/On One Bish Bash Bosh Saracen Avro Viner Super Prestige Bottecchia T2 Doppia Corsa Kindhuman Kudu Opus Allegro Pride ROCX Tour LT Package Included: Thread adapter: M15x1.5mm pitch external thread, 15mm long, M12x1.5mm internal thread Thru Hole Insert: 15mm OD x 12mm ID, 10mm long Axle: 12mm x 130mm long, M12x1.5mm threads, 2mm spacer (optional, for fine-tuning length) Installation Notes: 1. Apply grease or low-strength threadlocker to the thread adapter. 2. Use Park Tool SPA-2 or equivalent 2.3mm pin spanner to tighten the thread adapter into the fork. The flange must be on the outside. 3. Apply grease to the O-ring of the thru hole insert and install it into the fork from the outside using a combined pushing and twisting motion. Do not use the thru axle to drive the insert into the fork. 4. Apply grease to the threads of the thru axle. Tighten to a torque of 9–13.5 N·m using a 5mm hex key.