Item Type: Switching Power Product Material: Aluminum alloy Product Model: NDR-75-24 DC Output Range: 24V, 0-3.2A Output Voltage Accuracy: 1% Ripple and Noise: 150mV Efficiency: 88% Input Voltage: 100-240VAC Overload Protection: Constant current limit when the rated output power reaches 105%130%, and it will automatically recover after the load is normal Over-Voltage Protection: Output Voltage 12V: 1417V, 24V: 2933V, 48V: 5665V when shut down, restart and restore Overheating Protection: Overheating shutdown, automatic recovery after the temperature drops Start-up and Hold Time: 1200ms, 60ms, 60ms/115VAC, 2000ms, 60ms, 12ms at full load of 230VAC Insulation Characteristics: Between Input And Output: 3KVac, Between Input and Shell: 2KVac, Between Output and Shell: 0.5KVac, 1 minute Working Temperature: -20+70(reference for output derating curve) Vibration Resistance: 10500Hz, 2G 10 minutes/cycle, XYZ axis each 60 minutes; installation conforms to IEC60068-2-6 Safety Certification: Passed UL508, TUV EN60950-1 certification Electromagnetic Compatibility Standards: Emission: EN55022 (CISPR22), EN61204-3, Class B, Harmonics: EN61000-3-2, -3 Electromagnetic Compatibility Standards: Anti-interference EN61000-4-2,3,4,5,6,8,11, ENV55024, EN61000-6-2 (EN50082-2), EN61204-3, Class A heavy industry standard Mean Time Between Failures: 486,200 hours, MIL-HDBK-217F (25) Wiring Mode: Input End: 3 Points. Output End: 4 points screw DIN terminal Chassis Number: 221B Product Size: Approx. 102 x 125.2 x 32mm / 4 x 4.9 x 1.3in(WxHxD) How to Use: 1. The AC voltage specifications that the rail power supply can use are 110VAC, 220VAC and 380VAC. Therefore, before turning on the power supply, carefully check whether the connected voltage and the input voltage of the power supply are correct and consistent. 2. Do not load before powering on for the first time. First check whether the output voltage of the power supply is the same as the power supply of the connected equipment to avoid damage to the connected equipment. 3. Before using the power supply, please confirm whether the ground wire is properly connected, and mark the position of the specific power ground wire in the figure. 4. The power supply must be placed in a well-ventilated place with fast heat dissipation before and after use. 5. The determination of the output current of the rail power supply is closely related to the environment. It is determined based on the rated standard current of the rail power supply provided by the equipment or the average current value measured by a multimeter. And in the case of high ambient temperature, poor air flow conditions, and excessive inductive load, 20-30% more current margin must be prepared. 6. The input power of the rail power supply is generally determined by the input power of the rail power supply, which determines the rated power of the equipment supplied. However, in the case of not knowing the specific rated power of the equipment supplied, there are also certain modifications, and the power can be obtained based on the product of the rated current and voltage of the equipment supplied, that is, current x voltage. It should be noted that when the user selects the power supply, it should be greater than 15-30% of the actual power and peak power.