1. Made of good materials, durable and practical. 2. These should be pasted on any clean surface. 3. The stickers can fit the car parts you need to decorate well. 4. It can make your car look nice and provide some protection. 5. Suitable for Accord models from 2008 - 2012, suitable for left-hand drive. 6. When purchasing, please check the installation instructions: It is suggested to operate on a sunny day with high temperature or when the car is not needed at night. 7. - First, clean the edge of the wheel hub. Clean the area to be pasted to make sure the surface is free of dust, water and oil. There should be little dust on the wheel hub surface, and your hands should also be clean to reduce the chance of dust sticking to the pasting surface. - Heat the whole roll of stickers with a hair dryer. Heat until the stickers become soft to get a good effect. The principle of heating and pasting is to use the expansion and contraction of heat. After heating, the rubber surface expands and pastes, and adhesive force will be generated when it cools and contracts. 8. Note: Try not to use a high-pressure water gun to wash within 24 hours, and the driving speed should not be too high (the speed is recommended not to exceed 80 - 100 yards per hour). Everything will be normal after 48 hours. 9. Color: Carbon fiber pattern 10. Material: PVC 11. Package contents: - 15 center console stickers - 4 rear exhaust port stickers - 2 steering wheel stickers - 8 door control panel stickers 12. Warm reminder: - Check that the shape of the relevant parts of your car is consistent with the shape of the stickers. - Only the above package contents are included, and other items are not. 13. Note: Light and different monitors may cause the color of the item to be a bit different from the actual one. A measurement error of ±1 - 3 cm is acceptable.