Hand washing is mandatory when cooking, if our hands are covered with grease or if we have dealt with raw meat or poultry, a touchless soap dispenser can conveniently deliver soap without contaminating your hands. Automatic soap dispenser with intelligent infrared sensor provides hygienic, touchless and easy to use operation. Features: [Intelligent Infrared Sensor]The handheld soap dispenser is equipped with a built-in accurate intelligent infrared sensor and only 0,5 seconds of detection time to extract the liquid. [Adjustable amount of soap]1,5 ml pumps out every time, if you need more, hold your hands and wait another 2 seconds later, it will pump out again. [Anti-leakage]The sealed rubber material on the bottom of the soap dispenser will prevent soap from leaking and keep the dispenser from slipping on the counter. [IPX6 waterproof]Contactless soap dispenser with deep waterproof technology with IP67 rating to prevent soap or water corrosion on the circuit board. [Visible window]The visible window reminds you to monitor the remaining liquid and makes time to refill the soap. Technical data: Color:  silver Material: ABS, PC Style: modern Usage mode: infrared induction Induction distance: 2-3 inches Capacity: 400mL Water resistance: IPX6 Temperature: 3-40 Working voltage: DC 6V Occasion: kitchen, bathroom, hotel, bank, hospital, etc. Product size: 7*11.6*21.4 cm/2.75*4.56*8.42 inch Package weight: 280 g / 0,61 lb List of packages: 1 * Automatic Soap Dispenser 1 * User Manual Cautions: Follow the instructions or the product itself to properly install the battery with enough power, otherwise the soap dispenser will not work. Make sure the liquid cover is well mounted. Otherwise, the fluid will flow out. Do not use soap that is too sticky, otherwise it will not be smooth or cannot be discharged; too thick soap can be diluted by adding the right amount of water before use. During the first use, you can use a water test to remove the internal air. On first use, try it a few times first. Then the liquid will fill the hose and flow out. When the light flashes, it means a low battery level. Please replace the batteries. If it is not used for a long time, check that the internal soap liquid has not deteriorated. Broken soap liquid can cause the outlet to block and the liquid to be unable to release. Please DO NOT shake the devices to avoid serious damage. The product will be tested before leaving the factory. This is normal when you are getting a product with water drops.