Specification:_x000D_Introduction:_x000D_This is a low frequency tag scanner that adopt wireless identification technology and it suppors reading EMID,FDX-BISO11784/85 etc.tag._x000D_This scanner uses high brightness OLED display which can be seen clearly in bright light environment._x000D_It can store max 128 records of tag information with its built-in memory, users can upload the information to the computer through USB cable._x000D_This product is stable with simple operation which is widely used for little animal management, resource management, railway inspection etc._x000D_Operation:_x000D_Turn on the device and scanning. Press scan button to turn on the device and on scanning model._x000D_The tag NO.will be displayed on screen if detect a tag,display'No tag'if no tag is detected._x000D_Device could be charged and uploaded data by USB cable.When device is connected by USB,USBwill be displayed attop left corner, and on charging status for battery status._x000D_Press scann button for 3s, data will be uploaded from the scanner, MAX 128 records._x000D_After uploading successfully, display as below The data can be upload in real time if scanner is connected by USB cable when reading a tag._x000D_Scanner will be off after 120s without working._x000D_ _x000D_ _x000D_Notice:_x000D_Actual color may be slightly different from the image due to different monitor and light effect_x000D_Please allow 1-3cm deviation due to manual measurement_x000D_Description:_x000D_MODEL: W90A _x000D_WORKING FREQUENCY:134.2khz/125Khz _x000D_SUPPORT TAG: EMID, FDX-BISO11784/85_x000D_READING/WRITING RANGE: 2-12mm glass tube label 5cm;30mm animal ear mark 15cm related to label performance_x000D_STANDARD IS0: 11784/89_x000D_READING TIME:100ms _x000D_PROMPT:0.91 high brightness OLED screen, buzzer _x000D_POWER SUPPLY: 3.7V lithium battery_x000D_MEMORY: 128 pieces of information _x000D_COMMUNICATION: USB2.0_x000D_LANGUAGE: English or customized _x000D_WORKING TEMP: -1050Celsius_x000D_STORAGE TEMP: -3070CelsiusPackage List:_x000D_1x Scaner