Features: 100% brand new and high quality. Applicable to box manual sandblasting machine and box type automatic sandblasting machine. A blast nozzle accelerates the air and abrasive as the mixture exits the end of the hose. The taper and length of the nozzle's inlet and outlet determine the pattern and velocity of the abrasive exiting the nozzle. The composition of the liner material determines its resistance to wear. Specification: Condiiton: 100% Brand New Color: Sliver Material: Aluminum + boron carbide Size: As picture shown Operation: The operator inserts the nozzle washer into a contractor-thread nozzle holder and screws in the nozzle, turning it by hand, until it seats firmly against the washer. With all related equipment correctly assembled and tested, the operator points the nozzle at the surface to be cleaned and presses the remote control handle to begin blasting. The operator holds the nozzle 18 to 36 inches from the surface and moves it smoothly at a rate that produces the desired cleanliness. Each pass should overlap slightly. The operator must replace the nozzle once the orifice wears 1/16-inch beyond its original size. Package Included: 1 x Boron Carbide Nozzle