2020 new design of automobile decoration lamp.Side LED with corresponding design for hood can give you better lighting effect.IP67 waterproof and dustproof.Integrated with fuse, more safer.Metal circuit board light strip, not afraid of folding and bending.The length of LED light strip can be cut by DIY without damaging,so as to adapt to various cars.Light source: LEDLED design: Side LEDVoltage: 12VElectric current: 2APower: 12WWaterproof: IP67How to connect wires?1.Black line connect to negative pole + Red line connect to ACC = Engine starts to light up.2.Black line connect to negative pole + Red line connect to DRL= Turn on DRL to light up.3.Black line connect to negative pole + Red line connect to Low beam lights = Turn on Low beam lights to light up.4.Black line connect to negative pole + Red line connect to High lights = Turn on High lights to light up.How to do if LED light bar is too long?1.There is a cutting opening in every 5 intervals of the light strip, which can be cut according to the demand.2.The hot-melt adhesive strip is heated and melted by the lighter;3.Apply to the cut-out of the newly cut light strip and seal.4.Finally, close the sealing cap.Fitment:Suitable for all 12V cars and pickups.size:Light strip thickness: 5mmLight strip length: 80cmMaterial:ledcolour:Orange lightPackage Contents:2 x light bar1 x hot melt adhesive2 x Sealing cap1 x Double-sided tapeOnly the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the photo a little different from the real thing. The measurement allowed error is +/- 1-3cm.