AC 220V 1/2 Inch Electronic Timed 2-Way Compressor Gas Tank Automatic Drain Valve FG05 Name: Electronic Drain Valve Model: 507292 Indicator Lamp: LED (on/off indication) Voltage Range: ±10% Protection Rating: IP65 Insulation Class: H Maximum Working Pressure: 1.6 MPa Maximum Temperature: 90°C Ambient Temperature Range: -40°C to +60°C Maximum Current Consumption: 4 mA Supply Voltage: 24–240 V AC/DC, 50/60 Hz Discharge Time (ON): 0.5–10 seconds Time Interval (OFF): 0.5–45 minutes Widely used in filters, separators, dryers, gas tanks, drip legs, and other compressed air system components. Clean the compressed air system before installation. Observe flow direction during installation. Do not use hoses not rated for impact resistance. Ensure supply voltage matches drain valve specifications. When using DC, connect positive pole to terminal “1”. At factory shipment, the drain valve is pre-wired: Brown = Live (L), Blue = Neutral (N), Yellow-Green = Ground (GND). Tighten the terminal box screws securely to prevent moisture ingress. Warning: Before installing the electronic drain valve, ensure the compressed air system is fully depressurized (zero pressure) and the power supply is disconnected. Color: Gold + Black Material: Metal Size: Flow aperture: 5 mm; Inlet/Outlet Port: 1/2 inch Package Includes: 1 × Electronic Drain Valve Note: The package contains only the item listed above; other accessories are not included. Note: Screen settings and lighting conditions may cause slight color variation between the image and the actual product. Measurement tolerance: ±1–3 cm.