Material: MS modified silane polymer Capacity: 12g Appearance: Paste (white or transparent) Curing mechanism: moisture curing (relying on moisture in the ai r to promote curing) Face dry time: 20 minutes (spray a little water can accelerate the curing time) Follow-up operation: press tightly (fixed with auxiliary stickers or double-sided tape for more than 2 hours) Specific gravity (density): 1.52g or ml Hardness: 55 percent Maximum deformation: ±20 percent Elastic recovery rate: 80 percent Temperature (after curing): -45℃and90℃ Elastic modulus 100 percent : 3.0N or mm² Tear strength: 3.8N or mm² Tensile modulus at break: 200 percent Home Improvement: ceramic tile or glass or latex paint face or marble or granite or concrete face or gypsum board or rock wool or wood, etc. Metal: aluminum or steel or copper or iron or zinc, etc. Plastic: PC or PVC or GPPS or PMMA or PS or EVA or PET, etc. Environment: Humid environment (bathroom or kitchen), outdoor (anti-ultraviolet or low temperature), high temperature (automobile or industrial factory) Specifications: Widely used and easy to operate It has a waterproof effect, moisture resistance, cushioning and the like. Non toxic, solvent-free, non-polluting, non-corrosive, anti aging Application: frosted glass, marble, lacquered wood, soft metal plates, tiles, mosaics. It is best to use an invisible wall mount. More sticky, no safer nails, high strength, quick-drying glue, no noise, environmentally friend Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. YJL official store