Features: *100% brand new and high quality*The wireless receiving controller has the characteristics of high confidentiality, large storage capacity, stable performance, low power consumption, and is convenient to use, and does not need to adopt the traditional jumper or the code switch coding, and only needs to transmit the wireless signal transmitted by the remote controller. The receiving controller receives and stores. If the learned remote controller is lost during use, onlyclearthe information stored in the receiving controller, and the lost remote will not be able to remotely control the receiving controller. To reuse, it mustre-learn.*This product is a general-purpose intelligent controller, which can be used with most wireless remote controllers on the market, including fixed code (2262, 2260, 2264, 5326, M1E, M5E, etc.) and learning code (1527, 2240, 6P20B, 6P20D, etc.), rolling code (HCS301, HCS300, HCS200, HCS201, HCS100, HCS101, etc.) and some custom remote controls (for CAME, NICEFlro, etc.) *Very easy to programSpecifications:*Operating Voltage: 12V/24VDC*Static Working Current: 7mA*Working Temperature: -40degree Celsius~+80degree Celsius*Receiving Sensitivity: -112dBm*Frequency: 433.92Mhz*Contactor Current: 3A*Remote Control Capacity: Can be used with up to 400 wireless remote control, especially suitable for door control, community and other occasions need to support a large number of remote control*Size: 94mm*60mm*28.5mm (Approx.)Learning and Code ClearingMethod:1. Press the learning button on the controller, release the learning button when the LED light is on, the controller will enter the learning state (at this time, the LED will be off), then press the remote control button to control the controller, when you see the LED light of the controller flash for 5 times, it means that the learning has been completed. The learning button 1 on the controller corresponds to the relay 1, the learning button 2 corresponds to the relay 2. The control mo