12V 24V 36V Forward Reverse Motor Controller with Remote Transmitter Up Down Switch Limit Function Manual Operation

Working Voltage: AC/DC 12V-36V (compatible with both AC and DC power supply; wide voltage range from 12V to 36V, including 12V, 24V, and 36V) Working Current: 48mA Quiescent Current: 16mA Max Load: 10A Relay (optimal performance under 5A / 60W) Function: Receiver with manual button control and wired external button (transmitter not included). Connect the normally open terminal to the external button pin (U--S--D--GND) to control motor forward and reverse cycle. 1. Default State: OFF. If power is interrupted and then restored, the device remains OFF until manually turned ON. 2. Output Mode: Selectable between Momentary and Latched using a jumper on the receiver. Shipped default as Latched. To change to Momentary, adjust the jumper accordingly. Do not use Toggle mode. 3. Momentary Mode: Set jumper to positions "1 & 2" 4. Latched Mode: Set jumper to positions "3 & 4" 5. Operation: - Momentary: Press "Up" button for motor forward; release to stop. Press "Down" button for motor reverse; release to stop. - Latched: Press "Up" button for motor forward; press "Stop" to halt. Press "Down" button for motor reverse; press "Stop" to halt. 6. If limit switches are not used, UP, DOWN, and COM terminals are pre-connected before shipping. Remove the connection if using limit switches. 7. When receiver output is set to Latched mode, a 0.5-second delay is applied between forward and reverse operations as a protective feature. Type: Wireless Remote Controller Color: White Material: ABS Package Contents: 1 x Wireless Remote Controller (1 piece, 12V 23A battery not included) 1 x Receiving Controller Note: Only the items listed above are included. Other accessories shown in images are not part of the package. Light reflection and differences in display screens may cause slight variations in color between the product image and actual item. Measurement error allowance is +/- 1-3 cm.